Boost Profits, Expand Markets with A Digital CAD Cutter

Boost Profits, Expand Markets with A Digital CAD Cutter

 

Find out how the right cutter can add profits to your business.

 

 

How would you like to do names and numbers for uniforms at a 66% savings over ordering precut designs? And be able to offer faster turnaround and target new markets with an array of new products and services? For a low-cost investment of around £1,500, you can be significantly boosting profits every month as well as attracting new customers with a CAD cutter.

 

Cutters are a natural fit in any decorated apparel business. The advantages they offer are numerous, including:

• They work with a huge array of materials, including vinyl and film, and you can get a full-blown system, including supplies, for as little as £2000.
• These materials can be applied to cotton, cotton/polyester blends, nylon, 100% polyester, leather, canvas, wood, and metal. And in addition to apparel, you also can decorate accessories and extras such as umbrellas, helmets, cd bags and coolers. It’s just a question of picking the right material for the substrate.
• You have complete design control, allowing you to do things like custom fit long names on small jerseys, change fonts and colours, and so on.
• You’re not dependent on a supplier’s schedule; you make designs when you need them. If you run short of a vowel or a number one or mess one up, you make one more.
• Depending on the cutter you purchase, your new equipment may allow you to make a digital transfer of things like corporate logos, a left chest, or full-front design, which allows you to enter a host of new markets.
• In addition to teams, you can expand your markets to include local community projects, uniform wear, and all kinds of corporate businesses.  

 

And when you figure that somebody is going to be making healthy profits doing that business — well, it might as well be your shop, right? In the long run, this kind of market and decorating versatility can only help your business. With that in mind, here’s a look at what you need to know about buying a cutter.

 

Understanding the Basics

Cutters are available in two types: friction-fed, which includes roll cutters and sheet-fed cutters; or flat bed.

 

Most friction-fed cutters aren’t designed to handle twill, although there are a couple of significant exceptions. Typically, flat-bed cutters cost around £4000 which can do the job extremely well. The ability to handle twill and appliqué means your shop also has to add a sewing or embroidery machine.  And you need to be aware that flat-bed cutters can’t be used with roll materials. Many shops that do both have a friction-fed and a flat-bed cutter.

 

In either case, the cutter hooks up to your computer (generally not included as part of the purchase); much like you’d connect a printer. You’ll also need a heat press and materials to feed into the cutter. You send a design from the computer to the cutter, which then cuts it from the material — which you then weed (to remove unwanted material) and heat seal to a substrate.

 

Some suppliers offer packages that include the cutter, a heat press, and materials. In all, expect to spend roughly £2,000 and up for all the required equipment, including a good heat press and supplies — a low price given all the capabilities you’ll be adding to your shop.

 

Software. Cutters usually come with the software required, either in standalone form or as a plug-in for graphic arts programs such as CorelDraw or Adobe Illustrator. Essentially, the software acts as a driver for the cutter. While it’s a plus if you know graphic arts programs, you can happily get by without that knowledge; with some other software available that automates many of the functions, which would normally take more knowledge. Still, having the flexibility of a full-fledged graphic arts program really expands your capabilities and what you can do for your customers.

 

There are also CAD-cutting design programs that offer a wide range of predesigned templates geared to the team and sports market. Customers simply choose the typeface, design, colours, and layout they like best, and these are plugged into the template, and out comes a professional-looking design ready to be heat sealed. Another option is to rely on suppliers who offer artwork services. They will clean up your customer’s artwork and vectorize it so it’s ready to output to your cutter. (Cutters work only vector artwork, not bitmap or raster images.) Most clip art companies also offer thousands of mascots and images that can easily be imported into your CAD cutter programme and incorporated into a design.

 

Material. Materials come in sheets and rolls. One big advantage of roll goods is you do not have to stand there and feed sheets into the machine. You can load up a roll, which will then continuously cut until the job is done. There’s also no limit to the design’s length, since the roll is continuous. Rolls generally come in 38cm and 50cm widths.

 

Cutters also can do sign vinyl, which is usually a self-adhesive material; film, which is a heat-applied material used for apparel; sand-blast material; magnetic material for making refrigerator magnets and magnetic vehicle signs; and, in some cases, transfer paper. This means that not only can you offer the school football team numbered shirts; you can print up the team’s season schedule on magnetic material and sell it to teams and fans who want to put it up on the fridge.

 

As an alternative to vinyl, certain select suppliers also offer polyurethane materials, or PU which is more environmentally friendly. It is actually thinner, looks better and feels softer than vinyl. Furthermore, the PU product “loves itself” and you can, therefore, stick more layers together. An important feature of PU is that a two-colour, two-layer design will feel like just one layer However, some customers may prefer the thicker, shinier look of traditional vinyl.

 

For markets such as dance, fashion, and safety, you’ll find a multitude of film options, including foils, glitters, metallic, fluorescents, and reflectives. Reflective materials, which have recently become available in a variety of colors, are popular for safety where visibility is crucial, for example, for school children walking with backpacks. Now children can be safe and make a fashion statement at the same time!

 

Size. Cutters come in many widths — anywhere from 20cms to 160cms. Of course, the cutter’s cost increases accordingly, from about £700 to £10,000. Generally, though, expect to spend roughly £1000 to £1,500 on a quality cutter.

 

Unless you’re only going to use the cutter for hobby work, you should avoid anything less than 38cms wide. A 60cms width is considered a standard minimum size for a sporting goods dealer doing team shirts.  

 

Other Cutter Considerations

 

When shopping for a cutter, there are some other features to be aware of. They include:

 

Memory. Look for cutters with an adequate buffer memory as. This allows the unit to quickly download designs from the computer to the cutter.

 

Down force. Find out how many grams of force the cutter has. Some have about 150 grams of force, while others have about 450. Depending on the material you’re cutting, more down force may come in handy. You must have sufficient down force to cut heavier materials like twill, for example. So make sure your salesperson is aware of all the materials you anticipate cutting.

 

Optical eye. This is a relatively new feature available on cutters but one that can save a tremendous amount of time increasing productivity. A cutter with an optical eye sets up registration points and, with the software included, allows you to quickly set up contour lines around even complicated designs. It then quickly and precisely cut around any design.

 

If your cutter has an optical eye (this should cost from £1,400 – £2,000), you can then add a low-cost inkjet printer, and cut out full-colour designs for dark garments.  With an optical eye on your cutter you will not have to worry ever again about using scissors to laboriously cut away the white border around your designs. Just print the designs on transfer paper using the inkjet printer, use the cutter to contour cut the printed image, and use the press to heat seal the image onto the garment. An optical eye also allows you to contour cut items such as window stickers.

 

Presets. For each type of material you cut, the machine must be programmed with the specifics of that material. If you’re going to switch back and forth between vinyl and film, for instance, it’s handy to have a cutter that has a number of presets. This way, you simply push a button and the unit is ready to handle that material.

 

Warranty. Some suppliers offer extended warranties at no additional cost, so be sure to ask what type of coverage is included. Also, ask if the supplier will offer a free loan machine to use to keep production going should your equipment need servicing.

 

Training. Using a cutter requires only limited training, which you can get online or in person. In fact, many training programs take only an hour before you’re up and running. Find out whether the supplier offers in-person or virtual training, or both — and at what cost, if any.

 

Speed. Find out how fast the cutter operates. Most suppliers measure in terms of cms per second. A speed of about 38cms per second and higher is good. Keep in mind that more complicated designs will sometimes require a much slower speed.

 

Cut quality. Take a close look at the manner in which the cutter does its work. Are the cuts clean and smooth, or are they ragged? Watch the unit in action, and carefully examine samples produced on the machine.

 

With these considerations in mind, you’re ready to start shopping for a cutter for your business. It’s almost as if you’re purchasing not just a piece of equipment but a new employee who can handle an amazing array of tasks. With a cutter, you’re no longer limited by anything but your imagination.

 

SIDEBAR

Printer/Cutters Close Up

While a cutter has an incredible amount of versatility, a printer/cutter unit ups the ante by adding printing capabilities to the mix. A single unit can output full-color images—usually using inkjet technology—and do contour cutting all in with the same machine.

 

Using such a unit makes it easy to create customized signage with UV-resistant ink, and do digital transfers for apparel and other items—and it can still do everything a traditional cutter can handle. Of course, such capabilities come at a cost: Prices start at about £6,000 and reach £10,000 and upwards.

 

About this Article: This is one of a series of occasional articles issued to help those active in the garment decoration and embellishment industry by Target Transfers. Target is a major UK supplier of Equipment, materials, custom transfers, garments and accessories to the imprinted wear market, and a member of GroupeSTAHL, the world’s leading supplier of Identity for Textiles. Please visit Targets website for more details at www.TargetTransfers.com

 

 

About the Author

Martin Borley
Vice President
Target Transfers
wwwTargetTransfers.com

http://blog.targettransfers.com/

http://twitter.com/MartinBorley

illustrator split in grid

Adobe Illustrator CS Visual QuickStart Guide $15.95 Ready to use Illustrator CS’ new Scribble Effect to lend a loose, hand drawn look to your artwork? Eager to take advantage of its more than 200 professionally designed templates to jump start your own projects? If so, or if you simply need to get up to speed on every aspect of Illustrator CS now you need this book! As the standard Illustrator text in many design schools, this popular task based guide has taught a generation of users how to make the most out of Adobe’s graphics powerhouse. Now it’s back revised and updated to teach the next. Using simple step by step instructions, loads of screen shots, and an array of time saving tips and tricks, this volume represents the quickest route to Illustrator cs proficiency. Clearly marked locators to new and improved features, a 24 page color section, and highly readable text create a winning combination for every level of Illustrator user.

Total Training for Adobe Illustrator CS3 Advanced $64.95 Unlock the secrets of Adobe Illustrator CS3 as you learn advanced tricks and techniques in this video series. Showcasing his sense of design and creativity, your host, Geoff Blake teaches you how to make eye popping special effects, and how to use modern techniques to produce startling results. Learn about Illustrator’s advanced path manipulation commands, and how to use blends and clipping masks for amazing visual effects. You’ll also learn about Live Paint, 3D techniques, templates, and Illustrator CS3′s new Flash animation and export options. Highlights Get up to speed with Illustrator CS3′s advanced path manipulation commands and learn how to work with compound paths. Find out about Opacity Masks, Knockout Groups, and how to create gradient based transparency effects. Harness the power of Illustrator’s Live Effects, Warp commands, and path effects. Learn how to create eye popping effects with Blends and discover the amazing world of Clipping Masks. Discover how to get Illustrator content into Flash, including how to handle Illustrator symbols, create animation in Illustrator, and handling text.

The Adobe Illustrator CS2 Wow! Book $34.95 Designed to dazzle and inspire but not leave you in the dust, this beautifully designed volume lets you follow along as it dissects real world projects from some of today’s top Illustrator artists. In the process it teaches you how to use Adobe Illustrator CS2 in ever more creative ways for your own projects. Best selling author and award winning artist Sharon Steuer uses lavish, four color images of real world Illustrator CS2 projects to show what’s possible and then employs simple, step by step instructions to explain the techniques that will produce those effects. You’ll find comprehensive coverage of all of Illustrator CS2′s most important capabilities. Veteran users will be grateful to explore Illustrator CS’ new features, including the new drawing tool, Live trace, Live paint, SVG T and much more. On the CD, you’ll find many examples of artwork from the book, third party software, demos, samples, and more. Author: Sharon Steuer Published: August 2005 ISBN: 0321320468 480 Pages

Adobe Illustrator CS2 Visual QuickStart Guide $19.95 If you’ re looking forward to using cool new tools like Illustrator CS2′ s Live Trace or Live Paint in your vector artwork, or eager to take advantage of its more than 200 professionally designed templates, you’ ll need to get up to speed on every aspect of Illustrator CS2 now with this Visual QuickStart Guide! As the standard Illustrator text in many design schools, this popular, task based best seller has taught a generation of users how to make the most out of Adobe’ s vector graphics powerhouse. Now it’ s back revised and updated to teach the next. Using simple step by step instructions, loads of screen shots, and an array of time saving tips and tricks, this volume represents the quickest route to Illustrator CS2 proficiency. Clearly marked locators indicate new and improved features (such as enhanced type capabilities, powerful 3D graphics tools, enhanced PDF support, and more), a 24 page color section, and highly readable text create a winning combination for every level of Illustrator user.

The Hidden Power of Adobe Illustrator CS: Web Graphics Techniques $29.95 Adobe Illustrator is a powerhouse web graphics tool. The problem is most people don’t really know how to use it. That’s where this book comes in. Step by step, The Hidden Power of Illustrator CS: Web Graphics Techniques teaches you to use everything Illustrator CS has to offer, helping you understand the new features, stop stumbling over the tools, anticipate problems, and get better, cleaner results. This is a valuable and easy to use resource for all Illustrator users ready to take their art to the web. Traditional print designers and students will benefit from its clear explanation of core web concepts while web professionals will soak up the advanced instruction, including in depth coverage of SVG, web animation, and interactivity. Here’s just a little of what you’ll learn: Mastering essential Illustrator tools—and choosing the right one for the job Setting up your work environment Integrating your work with other applications, including GoLive, Dreamweaver, Photoshop, and ImageReady Using information in existing web pages to optimize images Building common web buttons and banners Setting up and exporting CSS layers from Illustrator Using Illustrator to build complete web pages Creating and using web page templates Setting up animations in Illustrator Understanding SVG and using it for interactivity Creating 3D animations using new Illustrator features Author: Steve Kurth Published: November 2003 ISBN: 0 7821 4158 7 352 Pages

---

Comments are closed